TIANHONG

Liquid hard capsule filling and sealing

Specify filling, sealing and drying around your formulation and pre-made hard capsule shell.

Explore solid filling

Choose the equipment scope

NYF-300 series

Filling and sealing

Sizes 00, 0, 1, 2, 3 and 4 · Hard gelatin or plant-based shells. For solutions, suspensions and microemulsions. Confirm the drying unit and total line footprint.

Total power
9 kW
Dimensions (L × W × H)
3800 × 900 × 1900 mm
NYF-300 series installation requirements
Mould holes
6
Machine weight
2300 kg
Power supply
Three-phase 380 / 220 V · 50 Hz
Compressed air
0.6 MPa
Room conditions
Around 20°C · 40–55% RH

NJY-600C

Liquid filling unit

Sizes 00, 0, 1, 2, 3 and 4 · For oily liquids, solutions, suspensions or pastes. Confirm shell material and any downstream sealing or drying.

Total power
5 kW
Dimensions (L × W × H)
860 × 960 × 1800 mm
NJY-600C installation requirements
Power supply
380 V · 50 Hz
Compressed air
Confirm for the quoted setup

Share the shell size, material and target dose to confirm the dosing setup and changeover parts. For a line with sealing, agree how seal quality and output will be checked.

From dosing to drying

Rotary section
Capsule handling
  1. Dose. Fill pre-made hard capsules using the dosing setup for your formulation.
  2. Seal. Discuss the temperature-adjustable glue system and the closure checks for your shell.
  3. Dry and discharge. Hanging holders keep the capsules oriented during drying. Confirm the drying unit in your quote.

Manufacturing and support

Since 2003 · Development and manufacture of capsule filling equipment.

Operating manuals and videos are available. Confirm packing, installation guidance, spare parts and one-year warranty coverage for the quoted machine.

Before you enquire

How should I compare production output?

Agree the trial duration, acceptable fill and seal criteria, and the drying setup using your own formulation and capsule shell.

What changes when switching formulations?

Confirm the cleaning procedure, removable dosing and sealing parts, and any tooling for the new shell size.

Can this equipment make softgels?

These machines use pre-made hard capsules. Softgel shell forming requires a separate process.

Tell us what you need

Share the formulation, viscosity, capsule size, target dose, accepted output and stages to include.

Machine detail

We have focus on the capsule filling machine for more than 20 years. We have developed the new type machine which can take place of soft gel machine.
 

CONTACT US

CONTACT US

+86-18267833730
© 2022 ZHEJIANG TIANHONG MACHINERY CO.,LTD All rights reserved.  Sitemap
Supported by leadong.com