TIANHONG · Capsule filling equipment manufacturer

Hard capsule filling machines for powders, pellets and liquids

Choose automatic or semi-automatic filling for solid formulations, or liquid filling with sealing and drying options. For pharmaceutical and supplement production.

Explore the equipment
Since 2003R&D, manufacture & service
Filling & sealingEquipment for liquid-filled hard capsules
NJP-3800C automatic capsule filler

Find the equipment for your material and workflow

Start with what goes into the capsule, the shell you use and the way your batches are produced.

Automatic hard capsule filling

Powders, granules & pellets

For continuous filling runs. Compare the required output, dosing arrangement and capsule tooling.

NJP series · model comparison below

Liquid hard capsule equipment

Solutions, suspensions & microemulsions

Fill pre-made hard capsules, then seal and dry them. Confirm which units are included in your quotation.

Filling → sealing → drying · shell sizes 00–4

Semi-automatic capsule filling

Separate sowing, filling & locking stations

For a workflow that combines machine stations and operator handling. Review staffing and batch changes alongside output.

CGN-208 · up to 30,000 capsules/h
Automation level and filling material are separate selection choices. Confirm the material, capsule shell and required tooling for the equipment you select.

Compare automatic capsule fillers

Three NJP models for different output requirements. Rated capacity is a starting point; agree the accepted output and fill criteria for your formulation and shell.

NJP automatic series · hard capsule filling
Model / specification 72,000 /hNJP-1200C 228,000 /hNJP-3800C 468,000 /hNJP-7800C
Machine
Filling materials Powder, granules, pellets and tablets · confirm dosing parts for the selected material
Capsule sizes 00, 0, 1, 2, 3, 4, 5 00, 0, 1, 2, 3, 4, 5
Safety capsules A–E
00, 0, 1, 2, 3, 4, 5
Safety capsules A–E
Total power 5.5 kW 10.5 kW 13 kW
Dimensions L × W × H 1090 × 905 × 2070 mm 1500 × 1200 × 2200 mm 1880 × 1390 × 2400 mm
Electrical supply 380 / 220 V · 50 Hz · confirm the electrical configuration for your site
Additional utilities Vacuum, dust collection, compressed air and water requirements vary by model.
Full specifications View model details ↗ View model details ↗ View model details ↗
Share your target fill weight, shell and production schedule.

Look inside the filling process

Use actual machine details to discuss feeding, access and tooling. Select a view and enlarge the image.

NJP-1200C · powder hopper

NJP-1200C machine details

The powder hopper supplies the dosing area. Discuss feed consistency for your blend, including fine or cohesive powders.

  1. 01Feed & separate
  2. 02Dose the fill
  3. 03Close & discharge

Ask which contact parts are removed for cleaning and which tooling is required when changing capsule size.

Liquid-filled hard capsules: plan the sealing stage

Liquid filling uses a pre-made hard capsule. The process can include capsule lead-in, sealing glue application, drying and finished capsule discharge.

Confirm the filling unit, sealing equipment and drying arrangement included in your quotation. This is a different process from softgel shell forming.

Liquid hard capsule equipment · configuration to be confirmed for the project

What determines the right configuration?

Output alone does not define a suitable machine. These three decisions shape the equipment and the acceptance discussion.

Your formulation and shell

Powder flow, bulk density and target fill affect dosing. Shell size and material affect feeding, separation and closure. Identify the blend that is hardest to run.

Your batch schedule

Compare accepted capsules over a working period, including normal refills, stops and product changes. Check cleaning access and the size-change parts required.

Your factory and line

Match machine dimensions, electrical supply and utilities to your site. Specify upstream feeding and downstream polishing or inspection connections separately.

Tianhong manufacturing site

Manufacturing and technical support

Since 2003 Capsule filling equipment development, manufacture and service

Tianhong manufactures automatic and semi-automatic capsule equipment, liquid filling and sealing equipment, and capsule polishers.

Machine assembly workshop +
Production area +
Components and production equipment +
Capsule filling equipment workshop +

Machine documents

Review the documentation for the quoted model and configuration, together with the electrical and utility requirements.

MD & LVD verification document · applies to the models listed in the file.

Shipment and operator support

Discuss machine preparation, packing and the guidance your operators need before installation.


Installation, maintenance and related equipment

Operating guidance

Instruction manuals and operation videos support machine use. Discuss installation guidance and the training your team needs.

One-year warranty

Tianhong offers a one-year warranty and lifetime technical support. Confirm coverage, spare parts and service arrangements with the quotation.

Configuration support

Discuss the dosing parts, capsule tooling and equipment arrangement for your requirements. Confirm included items and optional equipment separately.

Before you enquire

The details that help match equipment to your production.

Which capsule filling option should I choose?

Start with the fill material and capsule shell. Then compare output, operator involvement, cleaning and product changes. Automatic and semi-automatic choices depend on your production schedule as well as batch volume.

Is rated speed the same as my production output?

No. Your material, capsule shells, tooling, rejects and normal stops affect accepted output. Agree the trial conditions and acceptance criteria for your actual product.

Can liquid hard capsule equipment make softgels?

The equipment shown here handles pre-made hard capsules and a filling/sealing process. Softgel forming is a separate equipment process. Describe your intended capsule format before selecting a line.

What should I check for cleaning and changeover?

Ask for the removable product-contact parts, required tools and size-change components. Discuss your normal product changes and the cleaning procedure required by your site.

What should I confirm about delivery and installation?

Confirm production lead time, packing, shipment documents, utilities, installation guidance, warranty coverage and spare parts for the selected machine and destination.

Discuss your capsule filling project

Tell Tianhong what you plan to fill and how you need to produce it.

  • Fill material and target fill weight
  • Capsule size and shell material
  • Required output and batch schedule
  • Site utilities, destination and related equipment
We have focus on the capsule filling machine for more than 20 years. We have developed the new type machine which can take place of soft gel machine.
 

CONTACT US

CONTACT US

+86-18267833730
© 2022 ZHEJIANG TIANHONG MACHINERY CO.,LTD All rights reserved.  Sitemap
Supported by leadong.com