Publish Time: 2026-11-16 Origin: Site
A nutraceutical capsule filling machine should match the formulation, capsule shell, and range of products a factory plans to run. A low-density botanical powder can fill a capsule before it reaches the target weight. A vitamin and mineral blend can meet its weight target while individual ingredients separate during feeding. An oil-based formula can dispense consistently and still require a separate check for shell compatibility and leakage.
Start with the amount of formulation required per capsule, the shell material and size, and the quality checks for the finished supplement. Use those inputs to select the dosing method and decide what the equipment supplier needs to demonstrate.
Table of Contents
Two botanical blends with the same target weight can occupy different volumes. A fibrous herb powder may take up more space than a denser extract blend. If the target fill is close to the shell’s capacity, test the actual blend before committing to a capsule size or buying change parts.
Watch how the powder feeds during the run. Clumping, bridging, or buildup at contact surfaces can interrupt the supply to the dosing station. Sample at startup and after an agreed refill, then compare individual net fill weights and note whether the operator had to intervene.
Ingredients with different particle sizes or densities can separate as a blend moves through a hopper or feed system. When the product contains several active ingredients, ask the formulation and quality teams which tests are needed to verify composition as well as fill weight. Weighing a capsule can tell you how much material it contains, while ingredient-specific testing addresses how much of the relevant ingredient is present.
If a formula uses granules or coated pellets, verify that the proposed dosing configuration can handle the particle size and preserve the material through feeding and dosing. Tianhong’s automatic capsule filling machine range is a starting point for reviewing powder and pellet configurations.
For a probiotic product, confirm the formulation owner’s limits for exposure time, temperature, and humidity where applicable. Include staging and hopper residence in the review. A short trial with freshly prepared material may miss what happens when a batch pauses or waits in the production area.
Record the conditions under which samples were filled and how they were handled before testing. The quality team should define any viability or potency checks for the finished product. Use the machine trial to verify dosing and handling under the agreed conditions.
For a liquid-filled hard capsule, evaluate how the formulation dispenses at the intended filling temperature. Confirm viscosity, shell compatibility, and any sealing requirements. Include inspection after representative handling or storage if leakage is a concern.
Tianhong lists the NJY-600C liquid hard capsule filling machine separately from its automatic powder and pellet range. Ask which filling and sealing equipment is included in the proposal and how the finished capsule will be checked.
Supplement application | Main selection question | What to verify in a trial |
|---|---|---|
Botanical powder or extract | Will the target net fill fit the selected shell and feed consistently? | Individual fill weights, powder buildup, and shell closure |
Vitamin and mineral blend | Can the blend move through the equipment without unacceptable separation? | Fill weight at several points in the run and product-specific composition checks |
Probiotic blend | Can the operation stay within the formulation’s handling limits? | Exposure conditions, dwell time, and applicable finished-product results |
Oil or compatible liquid | Can the equipment dose the formulation and produce an acceptable closure or seal? | Fill quantity, shell compatibility, and leakage after agreed handling |
Bulk density gives you an initial estimate of the volume a powder will occupy. For example, 500 mg of blend at a loose bulk density of 0.40 g/mL occupies about 1.25 mL before any dosing compaction. The same mass at 0.80 g/mL occupies about 0.63 mL. These figures illustrate why two products with the same fill weight can require different shells or dosing settings.
Use the estimate to narrow the options. Then verify achievable fill weight and closure with your actual blend, shell, and dosing setup. If a serving requires more than one capsule, make the target fill per capsule explicit in the equipment brief.
A brand may specify gelatin or hypromellose (HPMC) based on its product brief and customer requirements. Send the actual shell specification and samples for the trial, even if the equipment supplier has previously run the same nominal size. Check feeding, separation, and locking using the parts quoted for your machine.
If you plan to use more than one shell supplier, identify the approved alternatives. Agree on which checks to repeat when the shell changes. This is especially useful for contract manufacturers that run several brands on shared equipment.
Make a list of the products the line will run, including shell sizes, fill types, and typical batch lengths. Separate a formula change within the same shell size from a size change that requires new tooling. Ask which dosing and shell-handling parts are included and which must be purchased separately.
Time the complete switch from the last accepted capsule of one product to the first approved capsule of the next. Include clearing the previous material, cleaning, changing parts, reassembly, and startup sampling. For short batches, this interval can have a greater effect on daily output than the machine’s rated speed.
For recurring powder or pellet batches, an automatic hard capsule filler may be worth evaluating when its dosing configuration matches the material. Tianhong’s NJP-3800C automatic hard capsule filling machine is one example for reviewing a higher-volume setup. Ask for the quoted tooling, then test a product that represents your normal schedule and one that is difficult to run.
Check where the equipment package ends. Capsules may still need polishing, inspection, counting, or packaging. If oil-filled products need sealing, include that operation in the output comparison. Define where accepted capsules will be counted so all proposals use the same measurement point.
Formulation: Fill type, target net weight per capsule, and available information on bulk density, particle size, viscosity, or handling limits.
Shell: Size, material, supplier reference, and production samples where available.
Production mix: Typical batch size, planned shell sizes, formula change frequency, and accepted output target.
Quality criteria: Individual fill-weight limits, closure and appearance requirements, and any product-specific sampling or testing.
Line scope: Dosing parts, change parts, cleaning access, and the downstream equipment that will receive the capsules.
Use production-representative materials and set the trial duration in advance. Identify when samples will be taken and how rejects and stops will be recorded. For a powder, include a normal refill or another event that could affect feeding. For a liquid, state the filling temperature and the point at which closure or leakage will be assessed.
Keep the test record with the quoted machine and tooling configuration. If the supplier uses a substitute blend for the initial trial, document which results still need to be checked with the actual formula. The final comparison should show which products ran within the agreed limits and what changes were needed between runs.
Depending on the configuration, a hard capsule filling system can handle powders, granules, pellets, or compatible liquids. Confirm the dosing method and shell for each formula. Liquid applications may also require separate sealing equipment.
Start with the target fill weight and the blend’s bulk density. Then run a trial with the actual material and shell. Verify that the dosing system can reach the target consistently and that the capsule closes correctly.
Some configurations can handle both. Ask the supplier to confirm compatibility with the exact shells and change parts. Test feeding, separation, and locking with each approved shell before production.
Fill-weight checks measure the total material in a capsule. If ingredient separation or potency variation is a concern, add the product-specific checks defined by your quality team.
Send your formula type, target net fill, capsule size and material, typical batch quantities, and changeover frequency. Include available samples, any handling limits, and the results you expect the equipment supplier to demonstrate.
Discuss your nutraceutical capsule filling application with Tianhong Machinery. Share the formulation type, target net fill weight, capsule shell, and batch schedule. If one line will run multiple products, include your most difficult blend and the shell sizes you need to change between.